Completed the rebuild of Waltham Pocket Watch Model 1883

Today I completed the rebuild of Waltham Pocket Watch Model 1883 - Movement 8911964.

Reset the roller table on the balance staff and then refitted the hairspring.

Photograph album of the rebuild of movement

Replaced the complete balance on movement, and it started ticking straight away!

Replaced the complete balance on movement, and it started ticking straight away!

Found some hands to replace the missing ones, so will run the movement for a week to let it all settle down then check and adjust timing.

Next on the to list is to manufacture a couple of keys for the two Model 1883 Waltham Pocket watch movements I now have running in the workshop!

Two Model 1883 Waltham Pocket watch movements 

Waltham Pocket Watch Model 1883 - Movement 8911964 start of the rebuild

Waltham Pocket Watch Model 1883 - Movement 8911964 start of the rebuild.

So now the movement is completely stripped down to its fifty-nine parts, it’s time to clean all the items well.    

 

All the items have now been cleaned and ready for reassembling.

All the items have now been cleaned and ready for reassembling.

Photograph album of the rebuild

With the train wheels fitted and oiled, now they are moving freely. 

Train wheels fitted and oiled, now they are moving freely. 

Next, the mainspring was lightly greased and replaced in the barrel.

Mainspring was lightly greased and replaced in the barrel.

Barrel refitted with the click, and now winds correctly.

Barrel refitted with the click, and now winds correctly.

Replaced the Balance wheel without hairspring and roller table so I could test that the deep cleaning of the jewels and pivots now let the Balance wheel run freely, which it does! 

Waltham Pocket Watch Model 1883 - Movement 8911964 deconstruction

Waltham Pocket Watch Model 1883 - Movement 8911964 deconstruction

7 Jewels (Screw Set) – Grade: A.W.Co.

(Year of Manufacture: 1898)  Run Quantity: 7,000 - Size 18s - 42mm

Movement Configuration: Open Face. Movement Setting: Key. Plate: Full Plate

Hairspring: Breguet – Adjusted: No.

Movement Finish: Brass (Gilt).  Winder on back (Key)

Hour Hand on a good Dial.

Movement dust cover. No

Deconstruction video made up of photographs from stripdown of the movement.

On stripping down this scrap movement I found the following items that need attention.

Firstly the whole movement is rusted up, the mainspring and balance wheel did not move.

During the deconstruction, I found the mainspring had been fully wound up and this caused the click to be jammed on ratchet wheel, plus the barrel was stuck to the barrel bridge by dried out grease!

After carefully taking and train wheels out from the movement due to them being very tight in the pivot holes, it is clear the whole movement had been over oiled, and because the movement had not been used for a long in oil had dried out and everything had become stuck.

One Dial and case screws are missing, and the roller table on the balance staff is loose.

So now the movement is completely stripped down to its fifty-nine parts, it’s time to clean all the items well.

1883 Model Waltham Pocket Watch brought back to life

1883 Model Waltham Pocket Watch Movement no 14304394 Brought back to life!

The eBay scrap movement was completely stripped down and cleaned.

1883 Model Waltham Back to Life

Needed a new mainspring and top balance jewel.
Now back to life, all I need for the movement is a Second Hand.

With a replacement second hand found, the movement is now finished.

Photograph album of the rebuild

I found an old Pocket Watch case which I hope to use with this movement. The case is marked Dennison Watch Case, with the stamps of ALD (Aaron Lufkin Dennison), the hallmark of the lion passant (.925 purity), the Anchor (Birmingham), letter h (1907), and the case number 2776. So the case is a Waltham Pocket Watch model size, it will need a replacement button and crystal.

Old Pocket Watch Case

Waltham Model 1883 Mainspring Upgrade

Granddad’s Watch: Waltham Pocket Watch - Model 1883 -
Movement No: 15247509.

In this video made up of photographs, is of upgrading the Mainspring
to a new Alloy Mainspring. Part #2205, which I purchased from USA!

First check which way the spring winds, Clock or anti-clockwise?

Place Barrel into a plastic bag to remove spring, to save taking your eye out!

Clean Mainspring Barrel, Arbor and Barrel cover.

Grease and fit spring, making sure it is correct way round
and Tee end of spring is in the hole in Barrel.

Replace Arbor and Barrel Cover again making sure Tee end of
spring is in hole in cover.

 Job Done!

Grandfathers Waltham Watch movement working

Arreton Amateur Timepieces

My video of my late Grandfathers Waltham Pocket Watch Model 1883 movement reassembled and working. The start of it all, and my new hobby...!

Waltham Model 1883 Movement No 15247509 Reassembled

My late Grandfathers Waltham Pocket Watch - Model 1883 - Movement No: 15247509. Reassembled.

Waltham Model 1883 Movement no 8195037

Video made up of Photographs of Waltham Pocket Watch, Model
1883. Movement No: 8195037.

On inspection after strip down and cleaning items found to fix
if possible.

1. Bottom Plate case fixing pin broke.

2. Regulator arm missing

3. Balance Cock had a strip of tape underneath (Bent?)

4. Roller Jewel Broke.

At present Hands and Mainspring and Barrel used on Movement
no; 17769273 in display case.

Photograph album at: https://photos.app.goo.gl/HvmV1mUysCebSh0u2

Model 1883 Waltham Pocket ~Watch parts cleaned

My video is made up from photographs relating to the Waltham
Pocket Watch Model 1883, Movement no: 17769273, Year of Manufacture: (1909-10).   

Movement Disassembled and Parts ultrasonic cleaned and ready
for reassembling.

Dismantling a Waltham Pocket Watch Model 1883

Dismantling Waltham 17769273  Pocket

Watch. Model 1883

Year of Manufacture: (1909-10)

Movement no: 17769273

Please excuse the slight out of focus on some parts of video, it is my first try at vedoeing while working on a watch. Hopefully it will better the more times I do it!